Directory
Company Profile
Molex
Molex offers a wide range of interconnect products, including: lighting products, industrial products, printed circuit products, fiber optics, antennas, cable assemblies, sockets, and connectors.
Company Info
- Website
- molex.com
- Address
- IL
Entries
-
in Backplane Connectors
Molex manufactures a line of backplane/midplane connectors including high speed connectors, ganged RF connectors, storage connectors, and backplane connector systems. The high speed connectors feature 100 circuits per 25mm, 72 circuits per 25mm, 36 circuits per 25mm, or 30 circuits per 25mm. These connectors are also available with data rates of 12.5, 10, 6.25, 5, 2.5, 1.5, 1 Gbps. The ganged RF connectors are used to connect up to 2.5 GHz single-ended or analog RF signals.
-
in Board To Board Connectors
Molex is a supplier of interconnect products inclduing electronic, electrical aand fiber optic connectors. Board to board connector products include micro-miniature, high speed, power, signal and storage connectors. Stoage board to board connectors available include serial ATA, SCA-2 and EBBI 50D. SCA-2 connectors feature small form factor, 20 circuit receptacle, rugged blind-mate guide ears with integral ESD grounding contacts and surface mount compatible design.
-
in Cable Connectors
Molex Inc. is a supplier of standard coaxial cable connectors with frequencies from DC to 40 GHz. Coaxial connector types include SMP, BMA, BNC, BSA, DIN 7/16. DIN 1.0/2.3, FAKRA, MCX, micro coaxial, MMCX, QMA, SMA (RF), SMB, SSMCX, TNC, Type F, and Type N. The connectors are primarily used in military, automotive, medical, instrumentation, telecom, and wireless applications.
-
in Card Edge Connectors
Molex offers PCI Express card edge connectors for server, desktop computer, motherboard, and workstation applications. These connectors have the following features: a simple through-hole design, hot plug/swap capabilities, a scalable modular design, data transfer rate support up to 2.5 Gbps, and PCI SIG specification compliance.
-
in Compression Connectors
Molex designs and manufactures micro SMT compression connectors that feature working ranges as low as 0.60 mm and pitch sizes from 1 mm to 3.70 mm. The connectors are available in single row and double row designs, and used in automotive, cell phone, digital camera, notebook PC, mobile phone, and portable gaming applications.
-
in Electrical Wire & Cable Connectors
A manufacturer of a variety of industrial electrical wire connector products including PCI express mini card for electronics equipment as well as passive-safety pole types for sealed quick disconnect systems for rugged outdoor applications.
-
in Electrical/Electronic Connectors
Manufacturers of various electronic and electrical connectors including wire to wire, board to board, wire to board, fiber optic, card, power, shielded I/O, modular plugs & jacks, RF, coax, microwave, and terminal blocks.
-
in Microwave Connectors
Molex designs and manufactures RF and microwave coaxial connectors that cover frequenices from DC to 40 GHz. Industries that use these connectors include military, automotive, medical, instrumentation, telecom, and wireless. SMP, BMA, BNC, DIN 7/16, MCX, DIN 1.0/2.3, FAKRA, micro, MMCX, QMA, SMA, SMB, SSMCX, TNC, type F, and type N comprise the connector types.
-
in Miniature Connectors
Molex offers Brad mini-change connectors in a variety of configurations. These connectors have the following features: 2-19 pole connections, straight or 90° angles, IP67 sealed, NEMA 6P rated, 100 lbs minimum cable strain relief, a molded key indicator, high performance gold over nickel plated contacts, and (patented) Quad Beam socket contacts with stainless steel sleeves. Molex connectors have a variety of industrial applications, including: solenoid operated valves, solar panels, rectangular proximity/photoelectric sensors, pumps, load cells, limit switches, lighting, linear position transducers, industrial refrigeration systems, industrial heaters, etc.
- Brad Mini-Change Connectors: Variety of configurations
-
in Pin & Socket Connectors
Molex offers their standard .093" connector system based on .093" (2.36mm) pin diameter. Crimp terminals, headers, and plugs and receptacles are available. The system is available in wire-to-wire and wire-to-board configurations and circuit sizes 1 - 15.
-
in Plastic Connectors
Molex offers metal plated plastic connectors. Their Plateau HS Dock features a plated plastic housing with multiple options for application design. The Plateau HS Dock PG connectors are fully shielded and feature 4 levels of mating for the PCB interface. The Plateau HS Mezz is a high speed, high density surface mounted mezzanine connector system.
-
in Printed Circuit Board (PCB) Connectors
Molex is a manufacturer of a large collection of I/O connectors and printed circuit board products include wire-to-board connectors, PCB headers, assemblies, flexible PCB connectors and more.
-
in Push-Pull Connectors
Molex offers Brad circular ruggedized push/pull connectors (CRP2) for handset, mobile phone, process control, and automation control applications. These connectors feature ruggedized metal housings on receptacles/plugs, non-tooling standard wire terminations, a sealed/watertight enclosure, and up to 8 circuits in a small 0.551" overall footprint. They can withstand up to 5,000 mating cycles, 21-lbs in torque, and 30-lbs in pull force.
-
in Quick Connect/Disconnect Connectors
Products include fully-insulated male, AviKrimp fully-insulated and piggyback quick disconnects. Other products include tab adapters, female terminals that mate with male tab terminals, and terminal blocks with male tabs. Products can be fully-insulated, non-insulated, or partially insulated; and are either molded vinyl, extruded nylon or molded nylon.
-
in RF Connectors
RF (Microwave) Coaxial Connectors. Frequencies from DC to 40 GHz. Markets supported include military, automotive, medical, instrumentation, telecom and wireless. Featuring MCX, SMA sub-miniature, SMP, TNC miniature, DIN 7/16, BNC, Type F, MMCX, SMB, Type II (2) and Ganged RF connectors.
-
in RJ-45 Connectors
A designer and manufacturer of various connector products, Molex's magnetic modular jacks incorporate wire-wound components in standard RJ45 jacks. These jacks are available as single or multi-port, and in Power over Ethernet versions. The company also produces shielded and unshielded modular plugs available in four, six, and eight-circuit configurations; through hole and surface mount, right angle modular jacks; and through hole and surface mount, vertical and bottom entry modular jacks. The modular jacks are suitable for 100Base-T (Fast Ethernet) applications.
-
in Rectangular Connectors
Molex offers heavy duty single/multi-module rectangular connectors for robotics and industrial equipment applications. These connectors feature circuits ranging from 12 to 72, seals to protect against contaminants/dust, cable clamps for integrating sealed rings, and ampere ratings ranging from 6 to 35. Connectors have crescent-shaped metal hoods with rotating locks, easy field removal of housing modules, and the following agency ratings: CSA, UL, TUV, VDE 0110, and IP65.
-
in Ribbon/Flat Connectors
Molex is a supplier of ribbon and flat ribbon cable connectors (for board-to-board applications). Types include wire-to-board, cable assemblies, board-to-board, SCSI, backplane, piece pin and receptacle assemblies, and many others.
-
in Right Angle Connectors
Molex designs and manufactures USB upright, right angle type A connectors for the PC industry. The reverse mount connectors feature a polarized housing design and provide shielding against RFI and EMI. The connectors are used in consumer and telecommunications applications including joystick, keyboard, laptop, modem, printer, server, handset, ISDN, and PBX.
-
in Solderless Connectors
Molex designs and manufactures a line of solderless terminals including terminal blocks, heat sealable terminals, insulation displacement connectors, magnet wire connectors, quick disconnects, and self-contained power connectors.
-
in Surface Mount Connectors
Molex designs and produces microminiature, surface mount FFC/PPC connectors for tight packing applications within the electronics equipment industry. The connectors are available in fine-pitch options including push and flip-type actuators; and feature pitch of 0.25mm to 50mm, bottom or dual contacts, and front or back actuators.